IL,11161
The Palmcorder automatically adjusts the focus over the entire zoom range.
Use Manual Focus (MF) when recording ...
• a subject throughglass.
• a scene where the subject is far from the
Palmcorder and there are objects in the
foreground.
• a subject with distincthorizontal stripes.
• a subject not centered in the Viewfinder.
• subjects with shiny surfaces.
• an obliquely angled subject.
POWER ZOOM
Switch
• a bright, flat subject such as a white wall
• in low light situations.
• a scene with fast motions, like a golf swing.
• Re-focusing may be required
whenyourPalmeorderisaimedat a new
scene.
Press MANUAL FOCUS so that "MF"
(Manual Focus) appears in the EVF or
the LCD monitor.
EVF/LCD Monitor
Press and hold the POWER
Switch to the "T" side (Full
J
ZOOM
Telephoto) until the lens is zoomed in
all the way (subject at maximum size).
Turn the MANUAL FOCUS control
until the picture is in focus.
• It may be necessary to back away
from the subject to focus the image
properly.
Press the POWER ZOOM switch to
"W" or "T" as desired.
• The subject will remain in focus over
the entire zooming range.
• It may be necessary to back away
from the subject to focus the image
properly.
i LTJP.[_ L*I ;[oId! 1.1 i[o] Id [*1,.'['€! I *j_ i
Press the "W" side of the POWER ZOOM Switch to the wide angle position.
Auto Focus will function with the subject as close as 1 inch (25ram) in front of the lens.
44 For assistance, call 1-800-211-PANA(7262)
To Next Page
Loading...
