This feature allows you to make smoother scene transitions for a more professional look.
Fade In:
Starting the first scene with"fade in"isvery
effective,
%
FADE Button
%
In Record/Pause mode, hold down FADE
until the picture and sound fade out.
Then, press RECORD/PAUSE to start
recording.
Release FADE and the picture and sound
will gradually fade in.
Fade Out:
Use to create a soft ending or (together with
fade in) for a soft transition from one scene
to the next.
During recording, hold down FADE until
the picture and sound fade out.
Then, press RECORD/PAUSE to pause
the recording.
Use when recording a subject that is darker than the surrounding scene, in a shadowed
area, or when the light source is in the back of your subject.
Press the BACK LIGHT Button to activate the Backlight
feature.
The Indicator "O" will appear in the EVF or LCD monitor.
Press the BACK LIGHT
Button again to cancel the ,
Backlight feature.
EVF or LCD
monitor indication.
BACK
Button
Note:
• The Indicator "O" will not appear in the EVF or LCD
monitor when OFF is selected in the DISPLAY menu.
For assistance, call 1-800-211-PANA(7262) 45
To Next Page
Loading...
