I:_T_I'_Zi[ol_T_J
Caution:
• Charge only with specified charger.
• Charge the Batterywithin an ambient
temperature range of 10 °C (50 °F) and
30 °C (86 °F).
• The Battery may bewarm after charging or just
after use. This is normal.
• Do not use an insufficiently charged or worn out
Battery.
• If charging isdone in extreme low or high
temperatures, Battery charge timeincreases.
Safety precautions:
• Do not place the Battery near, or dispose of in fire.
• Do not directly connect (short circuit) the positive
(+) and negative (-) terminals.
• Never attempt to disassemble or reassemble the
Battery.
i U.S.A. CONSUMERS: A'n'ENTION:
A lithium ion/polymer battery that is recyclabJe powers the product
_l. _!_..,1_ you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery withspecified models only.
• If the Battery isused in extremely high
temperatures, a safety device willautomatically
prevent operation.
To insure longer battery life:
• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place. Ifyou leave the Battery in
the Palmcorder or on the AC Adaptor, the Battery
will no longer be rechargeable.
• Keep the Battery terminals clean.
1
IN Terminal
Slide the Battery downward while
sliding the BATT RELEASE to remove
the Battery Pack. (p. 11)
Insert the DO Cable into the DC IN
Terminal.
Connect the other end of the DO
Cable to the AC Adaptor as shown.
Plug in the AC Adaptor.
• The POWER Lamp on the AC
Adaptor lights up.
(Supplied)
• When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor consumes
1W of electric power when plugged into
an AC outlet even when not in use.)
C Output Connector
O
12
To Next Page
Loading...
