_J _ Le'J_ln Lg_BJIBJl--_F_'J iL- ale _-,-J
You can also use the LCD monitor to
playback your recording.
1 POWER
180 °
90°
2LCD'-OPEN 4PLAY
3REWIN[) SEARCH
Before you begin. 1
Connect the Palmcorder to a power
• source. (pp. 11, 12)
Insert a recorded cassette.
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
VCR position.
Press LCD-OPEN to unlock the LCD
monitor and swing open.
Press "44 (REWIND/SEARCH) to
rewind the tape.
Press I_ (PLAY) to start playback.
Press • (STOP) to stop playback.
• When the tape reaches its beginning
during rewind or rewind search, it will
stop automatically.
• When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
• Using the LCD monitor reduces battery
operating time.
• You can place the Palmcorder on a table,
etc. for viewing. Rotate the LCD Monitor
180° and swing it up against the
Palmcorder body as shown.
You can connect earphones (not supplied)
to the PHONE Jack.
28
To Next Page
Loading...
