[ CAMERAmode ]
This feature is useful when you want to
record close-up shots of subjects located
beyond a normal zoom range of lX to 10X
magnification. With the digital zooming
feature, you can select a magnification of
25X or even to 700X.
II_FI]FJ
• Other Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected.
EVF/LCD
Zoom In ("T")
<
5
ZOOM
JOG KEY
Zoom Out ("W")
Set POWER to CAMERA.
Press MENU to display the CAMERA
MENU screen.
Rotate JOG KEY to select
I_, then press JOG KEY
to display the CAMERA FUNCTION
menu screen.
Rotate JOG KEY to selectr_,
then press JOG KEY to select
D.ZOOM1 or D.ZOOM2.
D.ZOOM1 : from 10X to 25X
D.ZOOM2 : from 10X to 700X
OFF : Turn off D.ZOOM
• Press MENU twice to exit.
Press REC/PAUSE'to start
recording and press POWER ZOOM to
zoom in or zoom out.
• The magnification level is always
displayed in the EVF or the LCD
monitor when DISPLAY is set to ON.
(Menu OSD: pp. 60, 62)
Repeat steps 2~4 to select OFF to
cancel this feature.
I _[R'FJ
2MENU
• The normal optical zoom functions from
lX to 10X.
• As magnification increases, resolution
significantly decreases.
• Because the image is enlarged digitally,
the picture may become distorted when
higher magnification levels are used.
• When the level falls below 10X, the
normal zooming function will resume.
• Focus distance becomes 1.2 m (4 feet) if
the lens is in full telephoto.
34
To Next Page
Loading...
