i ".J;[O]lI[O_TAIJ! I _I[| IJd|,z:] d_J_ loti_.tin
An image recordedon theDV Tapecan be transferred to your PC (Personal Computer).
_ (d|in t,(:.z,ulnnac:.]nh[:-]IIL'_JZ;11tJ; [O]NN[OlVAIIill_ I[9 |_ kvL_a_[,] ,_i n
• IBM PC/AT or compatible
• InteP Pentium ®Processor
• Microsoft Windows 95/98/Me/2000/XP
• RAM: 16 MB or more
• 2 MB minimum available hard disk
space
• 256 color monitor (full color
recommended)
• 3.5 inch 1.44 MB floppy disk drive
(for installation)
• RS-232C serial port (D-Sub 9-pin)
An adaptor (D-Sub 9-pin male to a
D-Sub female) is required for a
D-Sub 25-pin
• Mouse or other pointing device
*Satisfy the conditions recommended by Microsoft for Windows.
pod
(D-Sub 9-pin)
(Default is COM1.)
2 PC Connecting Cable for Windows
(optional: PC Connection Unit
(PV-DRS2, p 46))
Turn off your PC.
Connect the Palmcorder to your PC (Windows) using the PC connecting cable
(optional: PC Connection Unit (PV-DRS2, p 46)).
• Before connecting the Palmcorder to the PC, make sure the PC
power is off to insure that images are transferred properly.
Turn on your PC.
Set the Palmcorder POWER to VCR.
• For emended periods of use, it is recommended to use the AC Adaptor as a power
source.
• Refer to PC or Windows manual to identify which COM port is to be used for
connection.
43
To Next Page
Loading...
