VQT1W46
30
Basic
It is possible to set the focus to the specified subject. Focus will keep following the subject
automatically even if it moves.
1 Press 3.
• [ ] is displayed in the upper left of the screen.
• AF Tracking frame is displayed in the centre of the
screen.
•Press 3 again to cancel.
2 Bring the subject to the AF tracking frame, and
press 4 to lock the subject.
• AF tracking frame will turn yellow.
• An optimum scene for the specified subject will be
chosen.
•Press 3 to cancel.
• When [‡] is selected, [ ], [ ] or [ ] is set depending on the type of subject and
brightness.
• When [ ] or [ ] is set, the flash is activated twice.
• Only the following functions can be set in this mode.
[REC] mode menu
– [PICTURE SIZE]
¢
(P60)/[BURST] (P66)/[COLOR MODE]
¢
(P67)
¢ The settings which can be selected are different from when other [REC] modes are used.
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[BEEP]/[LANGUAGE]
• The settings of the following items are fixed.
AF Tracking Function
About the flash
Settings in intelligent auto mode
Item Settings
[ECONOMY]
([POWER SAVE]) (P23)
[5MIN.]
[AUTO REVIEW] (P24) [2SEC.]
Flash (P39) ‡/Œ
Self-timer (P43) 10 seconds/off
[QUALITY] (P61) A
[INTELLIGENT ISO] (P62)
[WHITE BALANCE] (P63) [AWB]
[I.EXPOSURE] (P64) [ON]
[AF MODE] (P65) š (Set to [ ] when a face cannot be detected)
[STABILIZER] (P68) [AUTO]
[AF ASSIST LAMP] (P68) [ON]
DMC-FS15GN-VQT1W46_eng.book 30 ページ 2008年12月9日 火曜日 午後7時46分