VQT4E00 (ENG)
24
Sensors (compass/altimeter/barometer)
are operated
The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.
• Information measured on this unit is only a rough indication. Do not use it for
technical purposes.
• When using this unit for full-scale mountain climbing, trekking, or underwater, use the
measured information (direction, altitude, depth, atmospheric pressure) only as a
rough indication, and always carry a map and purpose-built measurement tools.
Press [MENU/SET].
Press 3/4/2/1 to select [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select [Sensor Settings], and then press [MENU/
SET].
Press 3/4 to select [ON], and then
press [MENU/SET].
•
Exit the menu after it is set.
• To switch the environment information
screen, press [DISP.] several times.
A Compass
8 bearings are measured based on the direction the lens of the camera is pointing in.
• The coloured portion of the compass needle points north.
B Altimeter
You can check the altitude of the current location.
• Displaying range is j600 m (–2000 feet) to 9000 m (30000 feet).
C Barometer
With the current atmospheric pressure as a reference, it is displayed on the graph within
the range of j10 hPa to _10 hPa.
(Atmospheric pressure out of range cannot be displayed in details)
DMC-FT4&TS4EB-VQT4E00_mst.book 24 ページ ２０１２年１月２３日 月曜日 午前９時５２分
To Next Page
Loading...
