Panasonic DMC-FZ300PP - Table of Contents

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure. 1) --------3
1.4. How to Discharge the E.Capacitor on Flash
P.C.B. Unit ---------------------------------------------------4
2Warning--------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. How to Replace the Lithium Battery-------------------6
2.4. Caution for AC Cord (For EB/GC/GH) ----------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. Important Notice -------------------------------------------8
3.3. Service Notes -----------------------------------------------9
3.4. General Description About Lead Free Solder
(PbF) -------------------------------------------------------- 11
3.5. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 12
4 Specifications ---------------------------------------------------- 16
5 Location of Controls and Components------------------ 19
6 Service Mode ----------------------------------------------------- 21
6.1. Error Code Memory Function ------------------------- 21
7 Troubleshooting Guide---------------------------------------- 24
7.1. Wi-Fi Module (Flash P.C.B. Unit)--------------------- 24
8 Service Fixture & Tools --------------------------------------- 25
8.1. Service Fixture and Tools ------------------------------ 25
8.2. When Replacing the Main P.C.B. -------------------- 26
8.3. Service Position ------------------------------------------ 26
9 Disassembly and Assembly Instructions --------------- 27
9.1. Disassembly Flow Chart-------------------------------- 27
9.2. P.C.B. Location ------------------------------------------- 27
9.3. Disassembly Procedure -------------------------------- 28
9.4. Lens Disassembly Procedure------------------------- 42
9.5. Removal of the MOS Unit ------------------------------ 50
9.6. Main exterior parts assembly procedure ----------- 51
10 Measurements and Adjustments -------------------------- 52
10.1. Introduction ------------------------------------------------ 52
10.2. Before Disassembling the unit ------------------------ 52
10.3. Details of Electrical Adjustment----------------------- 55
10.4. After Adjustment------------------------------------------ 62
11 Maintenance ------------------------------------------------------ 63
11.1. Cleaning Lens and LCD Panel ----------------------- 63
12 Block Diagram --------------------------------------------------- 65
12.1. Overall Block Diagram ---------------------------------- 65
12.2. System Control Block Diagram ----------------------- 66
12.3. Video/Audio Process(1) Block Diagram ------------ 67
12.4. Video/Audio Process(2) Block Diagram ------------ 68
12.5. Lens/Flash Block Diagram ----------------------------- 69
12.6. Power(1) Block Diagram ------------------------------- 70
12.7. Power(2) Block Diagram ------------------------------- 71
13 Wiring Connection Diagram --------------------------------- 72
13.1. Interconnection Diagram ------------------------------- 72
14 Schematic Diagram--------------------------------------------- 73
15 Printed Circuit Board ------------------------------------------ 73
16 Exploded View and Replacement Parts List ----------- 73