61
*1. This adjustment must be performed not only replacing the MOS unit, but also simply removing the MOS unit.
*2. The pixel that always lights while shaded is called a white wound.
*3. The pixel that does not light while complete exposed is called a black wound.
IMPORTANT NOTICE: (After replacing the Main P.C.B. (Venus Engine is included) or Venus Engine)
After replacing the Main P.C.B. (Venus Engine is included) or Venus Engine, make sure to perform the "Initial Settings" first, then
release the "Initial Settings" in order to proceed the electrical adjustment.
NOTE:
1. If electrical adjustment or data re-writing is executed before "Initial Settings", suffix code list is never displayed, and it cannot
be chosen suitable suffix code.
2. Never remove the battery during initial setting in process.
To Next Page
Loading...
