Application (Record)
Using the [Rec] menu
- 144 - VQT4J11
• For the setting procedures of the menu. (→25)
[Flash Synchro]
You can set the timing for firing the flash depending on the picture that you
want to create.
■
Settings: [1ST] / [2ND]
Flash firing timing chart
[1ST] is set
Elapsed time
[2ND] is set
The picture is taken (shutter is open).
●
Normally, set to [1ST].
●
If you set to [2ND], [2nd] will be displayed in the flash icon on the screen.
●
When a fast shutter speed is set, the Flash Synchro effect may not be sufficiently
achieved.
●
Flash Synchro can be used even when you use an external flash.
To Next Page
Loading...
