Preparations
Using the [Setup] menu
- 42 - VQT4J11
• For the setting procedures of the menu. (→25)
[Version Disp.]
Check the camera firmware version or display software information.
●
When you press [MENU/SET] while the version is displayed, software information
such as the license is displayed.
[Format]
Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting
the built-in memory or card.
When a card/built-in memory is formatted, the data cannot be restored. Check the
content of the card/built-in memory carefully before formatting.
●
When formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in memory will be formatted if no
card is inserted.)
●
Always format cards with this camera.
●
All protected pictures and other picture data will be deleted.
●
This requires a sufficiently charged battery, or an AC adaptor (optional) and DC
coupler (optional). Do not turn off power or perform other operations during formatting.
●
Formatting the built-in memory may take several minutes.
●
If the card cannot be formatted, please try another card before contacting Panasonic.
For USA and Puerto Rico assistance,
please call: 1-800-211-PANA(7262) or,
contact us via the web at:
http://www.panasonic.com/contactinfo
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to:
lumixconcierge@ca.panasonic.com
To Next Page
Loading...
