Panasonic DMP-BD Series - Component Disassembly Steps; Top Case, Front Panel, and Switch PCBs

21
9.1.3. Top Case
1. Remove the 4 Screws (A) and 3 Screws (B).
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.
9.1.4. Front Panel
1. Unlock 7 tabs (A) - (G) turn.
Pull with the Front Panel in the direction of your side.
9.1.5. Power SW P.C.B., Front P.C.B. and
Open SW P.C.B.
9.1.5.1. Power SW P.C.B., Front P.C.B. and
Open SW P.C.B.
1. Remove the screw (A).
2. Remove the Power SW P.C.B..
3. Remove the 4 Screws (B).
4. Remove the Front P.C.B. and Open SW P.C.B..
9.1.5.2. How to assemble Tray door ass’y
1. Attach the Tray door spring to Tray door ass’y.