EasyManua.ls Logo

Panasonic DMP-BD55K - Connecting to a Television; HDMI Connection to TV; Component Video Connection to TV; Composite Video Connection to TV

Panasonic DMP-BD55K
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RQT9243 or RQT9350
11
Connecting to a television
A Connecting to your TV, via HDMI AV OUT
“HDMI Video Mode” and “HDMI Audio
Output” should be set to “On”. (> 32)
To experience better sound consider
adding a surround sound receiver, using
connections D, E, F or G. (> 12, 13)
The HDMI connection supports VIERA
Link “HDAVI Control” (> 26) when used
with a compatible Panasonic TV.
B Connecting to your TV, via COMPONENT VIDEO OUT
[BD55]: “Analog Audio Output” should be
set to “2ch (Downmix) + 5.1ch”. (> 32)
The Component Video cable does not
carry audio, so you must also connect the
L and R audio channels using the Audio/
Video cable.
To experience better sound consider
adding a surround sound receiver, using
connections D, E, F or G. (> 12, 13)
(Unplug the red and white plugs.)
Connect terminals of the same color.
Set the “Black Level Control” to “Darker”.
(> 31)
Using the COMPONENT VIDEO OUT
terminal, while playing DVD-Video, the
video output resolution is limited to
“480p”.
Be sure your TV supports at least 480p.
Set “Component Video Resolution” to
“480p”, “720p” or “1080i”. (> 32)
If this unit is connected to an amplifier/
receiver, etc. via an HDMI cable with
“HDMI Video Mode” set to “On” (> 32),
the video will be fixed to 480i.
C Connecting to your TV, via VIDEO OUT
[BD55]: “Analog Audio Output” should be
set to “2ch (Downmix) + 5.1ch”. (> 32)
Using the two analog audio channels this
connection provides, you will not be able
to use any surround sound audio modes.
To experience better sound consider
adding a surround sound receiver, using
connections D, E, F or G. (> 12, 13)
(Unplug the red and white plugs.)
Connect terminals of the same color.
High definition video cannot be viewed
using this connection. To view high
definition video, please use connection
types A or B. (B above)
HDMI IN
HDMI AV OUT
HDMI
compatible
television
HDMI cable
Back of the unit
COMPONENT
VIDEO IN
AUDIO IN
R L
Back of the unit
Audio/Video cable
(included)
Component Video cable
Television
AUDIO IN
R L
VIDEO IN
AUDIO/VIDEO IN
2ch AUDIO OUT
Television
Audio/Video cable (included)
VIDEO OUT
Back of the unit
Getting started
DMP-BD55_35PP-RQT9243_ENG.book 11 ペー 008年8月29日 金曜日 午前10時28