m
•
Refer to the operating instructions
of
the hub or router.
• WPS
(Wi-Fi Protected
Setup)
is a standard that
facilitates
settings
relating
to the connection and security
of
wireless
LAN devices. To see
whether your Wireless
router supports WPS,
check the
Wireless
router
operating instructions.
•
You
can perform this setup anytime by
selecting "Network
Easy
Setting"
in the
Setup
menu.
(
c:;>
32)
•
You
can redo these settings
individually using
"Network Settings".
(c:;>
32
)
•
Do not use this unit or
Wireless LAN adaptor to connect
to
any
wireless
network for which you do not have usage rights.
During automatic searches
in
a
wireless
network environment,
wireless
networks
(SSID*)
for which you do not have usage rights
may be
displayed;
however, using these networks
may
be regarded
as
illegal
access.
•
After performing network settings on this unit, the settings (encryp
ti
on
level,
etc.)
of
the
Wireless
router might change. When you have
trouble
getting
on
li
ne
on your
PC,
perform the network settings on your
PC
in
accordance with the settings
of
Wireless
router.
• Please
be aware that connecting to a network without encryption may
result
in the content
of
the communication being illegitimately
viewed by
a third party,
or
the
leaking
of data such
as
personal
or
secret
information.
I
*An
SSID (Service Set IDentification) is a name used by
wireless
LAN
to identify a
particular
network. Transmission is
possible
if the SSID
matches for both devices.
Reprogramming
the
remote
control
If
you have more than one
Panasonic
player/recorder and
the remote control operates both products at once, you
will
need to change the remote control code
on
one product to
prevent this occurrence.
(~
33,
"Remote Control Code")
I
Firmware updates
Occasionally, Panasonic
may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are
available
free
of
charge.
This unit is capable
of
checking the firmware
automatically
when connected to the
Internet
via a broadband connection.
When a new firmware version is
available,
the following
message is displayed.
To
update the firmware
Press
[HOME]
~
select
"Setup"
~
select
"Player
Settings"~
select
"Others"~
[OK]~
select
"Firmware
Update"
~
[OK]
~
select
"Update
Now"
DO
NOT DISCONNECT
the unit from the
AC power or
perform any operation
while
the update takes
place.
After the firmware is
installed, "FINISH" will
be
displayed
on
the unit's display. Unit
will
restart and the
following
screen
will be displayed.
mT
ln
~J
•
If
downloading
on
this
unit
fails
or
this
unit
is
not
connected
to
the
Internet,
then
you
can
download
the
latest
firmware
from
the
follow
i
ng
website
and
burn
it
to
a CD-R
to
update
the
firmware.
http
://panasonic.
jp/support/global/cs/
(This
site
is in
English
only
.)
To
show
the
firmware
version
on
this
unit.
(
c:;>
33,
"
System
Information
" )
•
Downloading
will
require
several
minutes.
It
may
take
longer
or
may
not
work
properly
depending
on
the
connection
environment.
• If you do not want to check for
th
e
latest
firmware versi
on, set
"Automa
ti
c
Update
Ch
ec
k"
to
"Off'.
(c:;>
33)
VQT3B58
15
U)
Ol
·
==
t:
~
~
U)
c:::
.!2
-
(,)
Cll
c:::
c:::
0
u
To Next Page
Loading...
