EasyManua.ls Logo

Panasonic DMP-BDT110 - HDMI Settings; HDMI Audio Output; VIERA Link; Network Configuration

Panasonic DMP-BDT110
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HDMI
Audio Output
This setting selects whether
or
not to output audio from
HDMI.
Select "Off'
when the
TV
is connected to this unit via an
HDMI
terminal, and this unit is also connected
to
other
devices, such
as
an amplifier/receiver via an
OPTICAL
terminal.
VIERA Link
Set
to use "HDAVI Control"
function when connected with
an
HDMI
cable to a device that supports
"HDAVI Control".
Select "Off'
when you do not want to use "HDAVI
Control".
Deep Color
Output
This setting is for selecting whether to use Deep Color
output when a television that supports Deep
Color is
connected.
Contents
Type Flag
Depending on the playback content, the
TV
will output
adjusting to the optimal method when a TV that supports
this function is connected.
I'
·Network
Network Easy Setting
(~
13)
Network Settings
Perform
network-related settings individually.
Press [OK]
to show the following settings:
LAN Connection Mode
Select
connection method.
Wireless
Settings
This allows the Wireless router and connection settings to
be
set
and the current connection settings and connection
state to be checked when a wireless connection is used.
Connection
Setting
The Wireless router connection wizard will be displayed.
Double
Speed
Mode
Setting
(2.4GHz)
When a 2.4 GHz wireless format is used, this setting
sets the connection speed.
If
you connect using the
"Double Speed
Mode
(40MHz)",
2 channels use the same
frequency band,
and there is consequently a greater risk
of
reception
interference. This can cause the connection speed to
drop
or
the connection to become unstable.
IP
Address/DNS Settings
This is for checking the state
of
the network connection
and setting the
IP
address and DNS-related.
Press [OK] to show the respective setting.
"Connection Speed Setting"
is enabled only when "Auto
Detect Connection
Speed"
is turned
"Off'.
32
VQT3B58
Proxy Server Settings
This is for checking the state
of
connection with the
Proxy
server and performing settings.
Press [OK]
to show the respective setting.
Internet Content
Settings(~
23)
(VIERA CAST)
Press [OK]
to show the following settings:
Lock
You
can restrict the usage
of
VIERA CAST.
Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the
VIERA CAST.
Depending on contents, this function effect will not
work.
Select "Off" when the audio is warped.
Time Zone
By selecting the time zone, it
is
possible to set the unit's
time to match your location.
Some VIERA CAST
contents require the time zone to
be
set.
Set the time zone if necessary.
DST
Select "On"
when using Daylight
Saving
time.
Network Drive Connection
It
is possible to access the shared folder
of
equipment not
compatible with DLNA, such as the Windows
XP operating
system, and play back video, still pictures, and music on
this unit.
For the setting and operation method
of
connected
equipment, refer to the following Website.
http ://pan as on i c.j p/s upport/g lobal/cs/
(This site is in English only.)

Other manuals for Panasonic DMP-BDT110

Related product manuals