When you experience
problems
with settings
Wireless
Settings
A confiict
with
another device occurred.
Do you want to configure wireless network connection
setting again
?
Display
Check
the
following
A
conflict
with another •
Please wait a few moments,
device occurred.
and then try again.
• Setting
of
the Wireless router
for MAC Address etc.
A time out error
•
The signal
may
be weak.
occurred.
iBDT110 i :
Using the
USB
extension cable supplied with
the Wireless LAN Adaptor,
adjust the position
of
the
Wireless LAN Adaptor.
An authentication error
•
The
SSID
(~
15) and the
or
a time out error
encryption key
of
the Wireless
occurred.
router.
•
Please wait a few moments,
and then try again.
•
BDT11()J :
Connection
of
Wireless LAN Adaptor
A device error occurred.
•
Contact our Customer
Service
Center or your
nearest dealer.
14
VQT3B58
Network
Easy
Setting
(Home
Network
Connection
Check)
1.
LAN
cable
co
nnection
· Fail
2.
IP
address setting ·
Fail
3.
Connecti
on
to
gateway : Fail
r;
t.AN
u
~~
't
~j;~~
~
~~
{
c;
n
~;ct;d.
~'~-~r:~
'
'
?'<~w.
Please
c
he
ck
the
connection.
Select
"
Yes·
and
press
[OK
] to
check
network
connection
agai
n.
Select
"
No
"
and
press
[OK]
to
finish
Network
Easy
Setting.
Display
1.
LAN cable connection or
Wireless setting
2.
IP
address setting
3. Connection to gateway
1. LAN cable connection or
Wir
eless setting
2.
IP address setting
3.
Connection to gateway
1. LAN cable connection or
Wireless setting
2.
IP
address setting
3.
Connection to gateway
: Fail
:Fail
:Fail
: Pass
: Fail
:Fail
:Pass
:Pass
or
Home
network
available
: Fail
Check
the
following
•
Connection
of
the LAN
cables
(~
1
0)
•
Connection
and settings
of
the hub
and router
• Settings
of
"
IP
Address/
DNS
Settings"
(~
32)
Network
Easy
Setting
(Internet
Connection
Check)
·
- Connection
to
t
he
Internet
Fa
ii(Error code:
8019)
Failed
the connection test.
Cannot
find
t
he
server.(Error code:
801
9)
Please
refe
r
to
t
he
owner's
ma
nu
al
for
the
cause
of
the
error and the
solution for
it.
Press
[OK
].
Display
Check
the
following
Cannot find the
• "Primary DNS"
and
"Secondary
server.
DNS"
settings
of
"IP Address/
(Error code:
8019) DNS
Settings
"
(~
32)
•
The server may
be
busy or the
Failed to connect to
service may have been
the server.
suspended.
Pl
ease wait a few
(Error code:
8020)
moments, and then try again.
• Settings of
"Proxy Server
S
e
tt
ings"(~
32) and the router