Panasonic DMP-BDT320 - STEP 3: Connecting to the network; Wireless LAN connection; LAN cable connection; STEP 4: Connecting to an AC power source

12
VQT3V87
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV
OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only
be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
≥ Set “HDMI Audio Output” to “Off” (> 31).
≥ Set “Digital Audio Output” (> 31).
HDMI AV OUT
HDMI cable
(only supplied for the Middle East and South East Asia) HDMI cable
Amplifier/receiver
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
≥ Set “Digital Audio Output” (> 31).
OPTICAL
Optical digital cable
Amplifier/receiver
OPTICAL IN
DMP-BDT320GNGCGA-VQT3V87.book 12 ページ ２０１２年２月９日 木曜日 午後３時１２分