Panasonic DMP-BDT320 - STEP 2: Connecting to an amplifier;receiver; HDMI AV OUT; OPTICAL

Connections & Settings
11
VQT3V22
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ Set “Digital Audio Output” (> 28).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT,
then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
≥ Set “HDMI Audio Output” to “Off” (> 28).
≥ Set “Digital Audio Output” (> 28).
HDMI AV OUT
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable
HDMI cable
OPTICAL
OPTICAL IN
Amplifier/receiver
Optical digital cable
Connections & Settings
DMP-BDT320_VQT3V22_eng.book 11 ページ ２０１２年１月１１日 水曜日 午後８時４９分