Panasonic DMP-BDT330 - HDMI CEC Control Functionality; Enabling and Using HDMI CEC

Playback
27
VQT4V74
“HDMI CEC”
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
See the operating instructions for connected
equipment for operational details.
Preparation
1 Set “HDMI CEC” to “On” (> 35).
(The default setting is “On”.)
2 Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
3 Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Repeat this procedure when the
connections or settings are changed.
When play starts on the unit, the TV will
automatically switch the input channel and the
screen of this unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.

≥ Operation cannot be guaranteed on all HDMI CEC
devices.
You can use this function by connecting the
equipment with an HDMI cable*.
* [BDT330] Only when connecting via an HDMI AV OUT
MAIN terminal on this unit.
Automatic input switching
Power on link
≥ [BDT330] When “HDMI(SUB) Output Mode”
(> 31) is set to “Normal” and the power of the
device connected to the HDMI AV OUT SUB is
turned on, the Power on link to the device
connected to the HDMI AV OUT MAIN will not
work.
Power off link
DMP-BDT330&230&130_EB-VQT4V74_mst.book 27 ページ ２０１３年１月３１日 木曜日 午後６時４０分