Panasonic DMR-BWT720EB - Page 39

39
Item FL display Key operation
Mode name Description Front Key
Demonstration lock/
unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking
the tray and not released by "Main unit
initialization" of service mode.
*When lock the tray.
1.
2.
3.
4.
"LOCK" is displayed for 3 seconds.
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
3. Press and hold [STOP] on the
remote control until "10 OCL" is
displayed on the unit's display.
4. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
*When unlock the tray.
1.
2.
3.
4.
"UNLOCK" is displayed for 3
seconds.
1. When the power is on, disc is in
tray, press and hold [OK], [B] and
[Y] on the remote control at the
same time for more than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2.Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
3. Press and hold [STOP] on the
remote control until "10 OCL" is
displayed on the unit's display.
4. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
*When press [OPEN/CLOSE] key
while the tray being locked.
Display "LOCK" for 3 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
Progressive initialization The progressive setting is initialized to
Interlace.
1.
2.
1. When the power is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
3. Press and hold [OK] on the
remote control or [OPEN/CLOSE]
on the unit.