62
9.1.3. Top Case
1. Remove 2 Screws (A) and 3 Screws (B).
2. Slide the Top Case rearward and open the both ends at
rear side of the Top Case a little and lift the Top Case in
the direction of the arrows.
9.1.4. Front Panel
1. Remove the Digital - Front FFC from the Digital P.C.B.
2. Unlock 6 Tabs (A) - (F).
3. Pull the Front Panel in the direction of your side.
CAUTION:
When inserting the FFC, pay attention as below.
9.1.5. Front (L) P.C.B., Front (R) FL P.C.B.
1. Remove 4 Screws (A) to remove the Front (L) and Front
(R) FL P.C.B.
9.1.5.1. How to remove Door Panel Unit
1. Remove 1 Screw (A) to remove the Door Stopper.
2. Remove the 2 Door Springs and remove the Door Panel
Unit with the left and right hooks up and moving the Door
Panel Unit to the left fully.