44
HDD Simple AV Scan
Check
Simple AV scan check of HDD
The [*] sign is added every 10
seconds while inspecting.
Two digits on the right side are the
progress level of the inspection (The
unit is %).
Example on the way of inspection:
When HDD is OK after inspection:
When HDD is NG after inspection:
[*] is the number of data of NG.
Press [3] [6] in service mode.
* When cancelling the inspection
mode while executing, do "forced
power-off".
Method:
Press [POWER] key on the main
unit more than 4 seconds.
HDD Check Simple quality judgement of HDD
When HDD is OK:
When HDD is NG:
Press [3] [7] in service mode.
Item FL display Key operation
Mode name Description (Remote control key)
To Next Page
Loading...
