46
HDD High Speed Scan High speed AV scan check of HDD
Reduces time by increasing the time-cut of
AV area compared to HDD standard speed
AV scan.
The [*] sign is added every 10
seconds while inspecting.
Two digits on the right side are the
progress level of the inspection (The
unit is %).
Example on the way of inspection:
When HDD is OK after inspection:
When HDD is NG after inspection:
[*] is the number of data of NG.
Press [3] [9] in service mode.
* When cancelling the inspection
mode while executing, do "forced
power-off".
Method:
Press [POWER] key on the main
unit more than 4 seconds.
Item FL display Key operation
Mode name Description (Remote control key)
To Next Page
Loading...
