51
Laser power confirmation Drive state is judged based on difference
between laser power value at shipping and
present laser power value.
Measuring stars (Measuring in
process).
When the measuring result is OK.
When the measuring result is NG.
When disc is not inserted.
When an error occurs while
measuring.
* is judgement result
If disc in not inserted, [NO DISC] is
displayed.
If power value study was filed,
[ERROR] is displayed.
1. Insert the Panasonic BD-RE
(Ver. 2.0) disc into the tray.
(Incompatible with other
media)
*If the error is DVD related,
insert the 5X media DVD-
RAM into the tray.
(Incompatible with other
media)
2. Press [4] [4].
CEC (H) output Check of the CEC terminal high output of
HDMI.
When the check is OK.
When the check is NG.
Press [5] [5] in service mode.
CEC (L) output Check of the CEC terminal low output of
HDMI.
When the check is OK.
When the check is NG.
Press [5] [6] in service mode.
Production Date Display Display the date when the unit was
produced.
YY: Year
MM: Month
DD: Day
Press [6] [1] in service mode.
Item FL display Key operation
Mode name Description (Remote control key)
To Next Page
Loading...
