55
Saves malfunction
history, user remote
control operation history
and HDD history
collectively to SD card.
Writes malfunction history, user remote
control operation history and HDD history
collectively onto SD card.
When history information is not
present
When saving to SD card is not
possible
When SD card cannot recognize
When writing finishes
To obtain multiple pieces of deck
information of the same software
version in one SD card, move files
already obtained or change the file
names.
1. Prepare a SD card to export
data from the unit.
2. Insert the SD card in the
service mode.
3. Press [6] [9] in service mode.
Registration of additional
USB-HDD
To register USB-HDD for inspection.
(Special mode)
When USB-HDD is in Special mode
(available for registered USB-HDD):
When Special mode failure (USB-
HDD registration impossible):
Press [7] [4] in service mode.
* When releasing this mode, press
the [POWER] button of the unit or
Remote Control.
After releasing the special mode,
registration in the special mode is
cancelled.
Details are described in "3.1.3.1.
Registering the USB-HDD".
Item FL display Key operation
Mode name Description (Remote control key)
To Next Page
Loading...
