58
USB-HDD Simple AV
Scan Check
Simple AV scan check of USB-HDD
The [*] sign is added every 10
seconds while inspecting.
Two digits on the right side are the
progress level of the inspection (The
unit is %).
Example on the way of inspection:
When USB-HDD is OK after
inspection:
When USB-HDD is NG after
inspection:
[*] is the number of data of NG.
Press [7] [7] in service mode.
* When cancelling the inspection
mode while executing, do "forced
power-off".
Method:
Press [POWER] key on the main
unit more than 4 seconds.
USB-HDD Check Simple quality judgement of USB-HDD
When USB-HDD is OK:
When USB-HDD is NG:
Press [7] [8] in service mode.
Tray OPEN/CLOSE Test The tray is opened and closed repeatedly.
"*" is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controll.
Item FL display Key operation
Mode name Description (Remote control key)
To Next Page
Loading...
