Troubleshooting
SQT0139
103
If there is any problem, the following message is
displayed on the screen.
When you experience problems with
Easy Network Setting
Wireless Settings
Display Check the following
A conflict with other
devices occurred.
• Please wait a few moments, and
then try again.
A time out error
occurred.
• Setting of the Wireless router for
MAC Address etc.
• The signal may be weak.
• The SSID and the encryption key of
the Wireless router.
• Please wait a few moments, and
then try again.
An authentication
error or a time out
error occurred.
A device error
occurred.
• If the problem is not solved, consult
your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
connection or
Wireless setting:
“Fail”
• Connection of
the LAN cables
(> 17)
• Settings of the
hub and router
2. IP address setting: “Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
• Connection and
settings of the
hub and router
• Settings of “IP
Address / DNS
Settings” (> 76,
85)
2. IP address setting: “Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address setting: “Pass”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address setting: “Home
network
available”
3. Connection to
gateway:
“Fail”
Easy Network Setting ( Internet Connection
Test )
Display Check the following
Cannot find the
server. (B019)
• “Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (> 76, 85)
No connection could
be made to the server.
(B020)
• The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
• Settings of “Proxy Server Settings”
(> 76, 85) and the router.
DMR-BWT740EB_eng.book 103 ページ ２０１４年４月３日 木曜日 午後３時２４分
To Next Page
Loading...
