LO
C
K
SD
FUNCTIONS
Copy All Pictures
SELECT
Copy All Pictures
Copy all pictures ( JPEG ) in the card.
SD
RAM
ENTER
Copy to
HDD
Copy from
SD CARD
Copy
Cancel
40
HDD
FUNCTIONS
55
RETURN
ENTER
RETURN
Album View
Copy Pictures ( JPEG )
SELECT
SD Card
ENTER
RETURN
Select folder to access.
SELECT
Select Folder
\DCIM
Press ENTER to set.
RETURN
ENTER
RETURN
Album View
Copy Pictures ( JPEG )
SELECT
SD Card
Copy Video ( MPEG )
To Others
Selecting the album view:
In the album view, you can select another folder in the submenu under
[Select Folder]. You can select a folder directly and open it. It may be
possible that folders which were not created with this unit cannot be opened.
Copying all pictures of an SD card
You can copy the entire contents of the SD card onto HDD/DVD with the function
[Copy All Pictures].
Place the SD card in the SD card slot.
!
In the following menu, select [Album View] with and press ENTER to confirm.
!
Press SUB MENU and press ENTER to confirm [Select Folder].
!
Select the required folder with and press ENTER to confirm.
Automatic detection of an SD card
SD cards are detected automatically on being inserted.
Place the SD card in the SD card slot.
!
In the following menu, select [Copy Pictures ( JPEG )] with and press ENTER
to confirm. The [Copy All Pictures] menu appears.
!
Select with and HDD or DVD.
!
Select [Copy] with and and press ENTER to confirm.
!
To stop copying prematurely, press and hold RETURN for 3 seconds.
The copied folders are placed behind the folders already on the DVD.
The print setting DPOF is not transferred during copying. The order in which the
pictures are registered in the copying list may possibly not correspond to the order
in the copying target.
!
To exit copying press ENTER.
!
To do another copy, press RETURN.
!
Repeat the steps stated above.
If you copy the pictures folder for folder or card for card, all other files in this folder
will be copied as well as the picture files. However, this does not apply to sub-folders
contained in the folder.
If the target folder already contains pictures, the new pictures are recorded after the
existing ones.
If the target drive does not have enough capacity or the number of files/folders being
copied exceeds the maximum, then the copying process is stopped prematurely.
If the copying source folder has no name, this folder may be given another name on
the copying target. Give the folder a name before copying.
Copy Video (MPEG2) (only available when saved on the SD Card )
All videos in MPEG2 format on the SD Card are copied. You cannot use this unit to
play MPEG2 videos directly from the SD Card. First copy the MPEG2 videos to DVD-
RAM or HDD.
Moving pictures coded in MPEG2 format recorded with a Panasonic SD video
camera, digital video camera etc. can be saved on HDD or DVD-RAM (all recordings
on one day are saved as one title). Playback or recording is not possible while
copying MPEG2 pictures.
PICTURE
High Speed
2
Copy Mode
Start Copying
Press ENTER to start copying.
ENTER
RETURN
3
Create List
2
SD
RAMHDD
The menu Copy appears. The copy list will be created automatically.
You can change the [Copy Direction] to DVD or change the copy list.
!
Confirm [Start Copying] with ENTER.
!
To stop copying prematurely, press and hold RETURN for 3 seconds.
54
To Next Page
Loading...
