Panasonic DMR-EX75EG - Power P.C.b; Rear Panel

10.9. POWER P.C.B.
1. Remove the Screw (AC Inlet).
2. Remove 3 Screws and disconnect the 2 Connectors.
3. Lift up Power P.C.B. a little upwards and remove the P.C.B.
sideways out of the Guide Pins.
Note:
When inserting P.C.B. confirm correct positions
of Guide Pins.
10.10. REAR PANEL
1. Disconnect Fan Connector.
2. Remove 7 Screws (A) and 2 Screws (B).
3. Unlock 2 Locking Tabs to remove Rear Panel.
34
DMR-EX75EG / DMR-EX75EC / DMR-EX75EB / DMR-EX85EG / DMR-EX85EB