Recording
TQBS0037
33
Recording TV
programmes
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Data service will not be recorded.
• Following contents or media cannot be played back while
recording.
- video file
- photo
- USB HDD (For data files, > 25) and USB memory
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On” (> 97),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
• The picture quality of encrypted programmes is not
changed until they are decrypted. (> 35)
This unit can record UHD/HDR programmes.
UHD (4K) programmes are significantly larger
than HD (2K) programmes in data size. If you
keep recording UHD (4K) programmes, free
space on the HDD may be used up quickly.
Before this happens, however, you can copy them
to an external USB HDD.
• You can save them to a disc. (> 61)
• For details about recording times, refer to “Recording
modes (picture quality) and approximate recording times”.
(> 109)
• This unit can record two programmes being
broadcasted at the same time.
§
• About CI Plus restriction (> 10)
• Notes for recording of an encrypted broadcast
(> 35)
Preparation
You can change the recording mode (picture
quality) (> 34)
1 Select the channel to record.
2 Press [REC ¥].
Recording will start.
3 Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
§
[UBS80]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (> 13)
Automatic Stop at 8:45
REC1/OTR
Recording Time
Continuous recording
30 min
Recording UHD/HDR programmes
DMR-UBC&UBS80EG_eng.book 33 ページ ２０１７年３月２日 木曜日 午後７時１２分
To Next Page
Loading...
Need help?
General
