Getting started
TQBS0033
13
§ Check the version of the single cable router. (> 22)
HDMI cable connection (> 14 to 18)
[UBS90] Antenna connections
The following three connection methods are available. Choose a method suited to your environment.
A Using a single cable router:
You can record three programmes simultaneously.
• Attach the splitter (supplied) to LNB IN 1 and LNB IN 2 terminals, then connect satellite cable to
the splitter.
B Using a multi switcher:
You can record two programmes simultaneously.
• Connect both LNB IN 1 and LNB IN 2 to the satellite dish.
C Connecting a satellite cable directly:
You can record only one programme at a time.
• Connect LNB IN 1 terminal to the satellite dish.
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Satellite dish
Satellite dish
Multi switcher
Satellite dish
Single cable router
§
Splitter (supplied)
DMR-UBC&UBS90EG_eng.book 13 ページ ２０１７年３月２日 木曜日 午後７時６分
To Next Page
Loading...
