327
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(34) Remove 2 Screws.
(35) Remove the Lower Exit Guide.
(36) Connect the Stamp Harness to Stamp Solenoid.
(37) Secure the Stamp Solenoid with 1 Screw (Long).
(38) Reinstall the Lower Exit Guide removed in Step
(35).
(39) Install the Stamp Assembly.
(40) Reinstall the all parts removed in above steps
and close the ADF Covers.
(41) Attach the TA Label (specified destination) to the
Lower Rear Cover as illustrated.
(34)
(35)
(36)
(37)
(39)
(38)
TA Label
To Next Page
Loading...
