552
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
3. Stitching
When all the sheets are properly set in the vertical path assembly, the two stitchers, stitch the stack.
The Stitchers are positioned so that they face the center of a stack.
The two Stitchers are not operated simultaneously so as to prevent the paper from wrinkling between
the two staples and to limit the load on the power supply.
If only one sheet of paper arrives from the Copier, stitching does not take place and the sequence goes
to the next operation (stack feeding).
Fig. 3-011
Stitcher
Staple
To Next Page
Loading...
