105
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(29) Remove the Pin (2743).
(30) Remove 2 Screws (21).
(31) Move the Harness Bracket (3525).
(32) Disconnect the Harness on the Toner Waste
Sensor.
(33) Disconnect the Harness on the HVPS (CN101).
(34) Lift up the Toner Waste Pipe 2 (4111).
To Next Page
Loading...
