189
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Note:
These error codes will appear only when the optional accessories are installed. Refer to the appropriate
Optional Unit Service Manual.
E7: Optional Unit Error
Code Function Check Points
E7- 20 Finisher Paper Transport Motor See Sect. 11 Finisher Options.
E7- 21 Finisher Paper Exit Motor
E7- 22 Finisher Damper Motor
E7- 23 Finisher Staple Motor
E7- 24 Finisher Staple Sift Motor
E7- 25 Finisher Paper Height Sensor
E7- 26 Finisher Backup RAM Data
E7- 27 Finisher Tray Lift Motor
E7- 28 Finisher Punch Motor
E7- 29 Finisher Punch Shift Motor
E7- 40 Finisher Saddle-Stitch
Communication
E7- 41 Finisher Saddle Positioning
Plate Motor
E7- 42 Finisher Saddle Folding Motor
E7- 43 Finisher Saddle Guide Motor
E7- 44 Finisher Saddle Alignment
Motor
E7- 45 Finisher Saddle Rear Staple
Motor
E7- 46 Finisher Saddle Front Staple
Motor
E7- 47 Finisher Saddle Push Motor
E7- 48 Finisher Swing Motor
E7- 49 Finisher Sensor Connector
E7- 50 Finisher Micro Switch
E7- 51 Finisher Delivery Motor See Sect. 11 Finisher Options.
For DA-FS355/355A, DA-SP41 only.
E7- 52 Finisher Paddle Motor
E7- 53 Finisher Saddle Folding Sensor
E7- 54 Finisher Punch Communication
E7- 55 Finisher Punch Power Supply
E7- 56 Finisher Punch Registration
Sensor
E7- 57 Finisher Punch Sensor
(Horizontal Registration)
E7- 58 Finisher Punch Sensor
(Waste Full))
E7- 90 Hardware Key Abnormal 1. Incorrect Hardware Key is installed.
2. Hardware Key is defective.
To Next Page
Loading...
