369
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(6) Disconnect the Finisher from its Host Machine.
(7) Remove 2 Screws, and open the Lower Front
Cover.
(8) Remove the Screws and then, detach each Foot
Cover.
(9) To correct the height, loosen the Fixing Screws
(Black) on the Front and Rear Casters on the
pickup side of the Finisher.
(10) To increase the height of the Finisher, turn the
Adjusting Bolt clockwise as illustrated; turn the
Adjusting Bolt as required. (Perform this for both
Front and Rear Casters.)
(7)
(7)
(8)
(8)
(8)
(8)
Adjusting Bolt
Fixing Screws
(Black)
To Next Page
Loading...
