412
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(7) Release the 2 Harnesses from the Harness
Clamp. Secure the 2 Harnesses without turn.
(8) Insert the Power Supply for Finisher to the Main
Machine.
(9) Connect 2 Harnesses to CN65 and CN66 on the
Power Supply for Finisher.
(10) Disconnect the Dummy Connector.
(11) Connect the LVSC Harness and the LVPS
Harness.
(12) Secure the Power Supply for Finisher with
1 Screw.
(13) Secure the Harness to the Harness Clamp.
(14) Reinstall the LVPS Cover.
(15) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
(7)
(9)
(10)
(11)
(8)
(12)
(13)
To Next Page
Loading...
