487
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 1-017
(5) Set a new Staple Case (FQ-SS66).
Reference:
You may set no more than one Staple
Cartridge at a time. Make sure that the new
Cartridge is one specifically designed for the
Finisher Unit.
Note:
Do not remove the Tape used to hold the
Staples in place before installing the Staple
Cartridge.
Fig. 1-018
(6) Pull the length of Tape (used to hold the Staples
in place) straight out.
Fig. 1-019
(7) Push the Stapler Unit until it stops and turn the
Green Lever to the right to lock.
Fig. 1-020
(8) Close the Front Cover.
To Next Page
Loading...
