514
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
3. Buffer Paper Path 2
This is the paper path when copy sizes shown in Table. 2-003 are stacked. A maximum of two copies
(two originals or more in the staple mode) are wrapped round the Buffer Roller, during which job offset
and stapling are performed on the Stapling Tray.
Table. 2-003
The following shows paper delivery operation in the case of two originals in the staple mode.
a. The first copy is moved in the direction of the Buffer Roller.
Fig. 2-020
b. The first copy wraps around the Buffer Roller and, at the same time, the second copy arrives from
the Copier.
Fig. 2-021
c. The second copy is laid over the first copy.
Fig. 2-022
Copy size Length 182 to 232 mm, and width 182 to 297 mm
Typical copy
examples
A4, B5, LTR,
(excluding transparencies and thick stock)
1st Copy
Buffer Roller
1st Copy
2nd Copy
1st Copy
2nd Copy
To Next Page
Loading...
