Panasonic DP-6030 - Page 77

77
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2.2.10. Corona Unit 2
(1) Open the Front Cover. (See Sect. 2.2.5.)
(2) Swing the Hopper Unit to the right side.
(See Sect. 2.2.5.)
(3) Pull out the ADU Unit. (See Sect. 2.2.9.)
(4) Remove the Corona Unit 2 (2352).
(5) Remove the Front and Rear Block Sheets
(2307, 2303).
(6) Remove the Tension Spring (2339).
(7) Remove the Corona Wire 1 (2335).
(8) Remove the Tension Spring (1914).
(9) Remove the Corona Wire 2 (2334).
(10) Remove 1 Screw (F10).
(11) Release the Harness from the Clamp.