EasyManua.ls Logo

Panasonic DVC20 - Playback mode; Playing back tape; Slow-motion playback;frame-by-frame playback

Panasonic DVC20
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Playback mode
25
Playback mode
Playing back tape
Set to Tape Playback Mode.
1 Operate with cursor buttons.
1/;: Playback/Pause
6: Rewind/Review playback
(Reverts to playback with the 1/; icon.)
5: Fast forward/Cue playback
(Reverts to playback with the 1/; icon.)
:Stop
During cue/review playback, fast-moving images may show
noise as a mosaic.
Before and after cue/review playback, the screen may
become blue for a moment or images may be disturbed.
ª
To adjust volume
Adjust the speaker or headphone volume for playback.
1 Move the [W/T] lever (or sub zoom lever) to adjust the
volume.
Towards [T]: increases the volume
Towards [W]: decreases the volume
(Nearer the bar to [r], larger the volume.)
On the remote control, press the [T] button to increase the
volume or the [W] button to decrease it.
When the adjustment is completed, the volume indication will
disappear.
If you do not hear the sound, check the settings of [SETUP]
>> [12bit AUDIO].
ª
Repeat playback
When the tape end is reached, the tape will be rewound and
played back again.
1 Set [ADVANCE] >> [REPEAT PLAY] >> [ON].
The [ ] indication appears. (In order to cancel the repeat
playback mode, set [REPEAT PLAY] >> [OFF] or set
[OFF/ON] switch to [OFF].)
ª
Settings on the audio
If you cannot listen to the desired audio when playing back a
tape, check the settings in [SETUP] >> [12bit AUDIO].
When you record or dub the audio in [12bit] and set [SETUP]
>> [12bit AUDIO] >> [MIX], the audio will be played back in
stereo sound regardless of the settings in [AUDIO OUT].
Slow-motion playback/frame-by-frame
playback
Set to Tape Playback Mode. (Slow-motion playback can
only be performed by using the remote control.)
Slow-motion playback
If the image is recorded in the SP mode, then it will be played
back at a speed approx. 1/5 the normal speed.
If the image is recorded in the LP mode, then it will be played
back at a speed approx. 1/3 the normal speed.
1 During playback, press the [E] button or the [D] button
on the remote control.
If the slow-motion playback continues for approx.
10 minutes or more, then the playback will automatically
stop. (10 minutes of slow-motion playback is equivalent to
approx. 2 minutes in the SP mode or approx. 3 minutes in
the LP mode.)
Frame-by-frame playback
1 During playback, press the [;] button on the remote
control.
2 Press the [E] button or the [D] button on the remote
control.
Pushing the [W/T] lever (or sub zoom lever) towards [T]
(normal direction) or towards [W] (reversed direction) of this
camera-recorder during playback pause also turns into the
frame-by-frame playback. If you keep pushing the lever,
then the images will continuously be played back frame by
frame.
ª
To return to normal playback
Press the [1] button on the remote control.
Slow-motion playback
In the reversed slow-motion playback, the time code
indication may be unstable.
Frame-by-frame playback
Press and hold the [E] or the [D] button in the playback
pause, and then the images will continuously be played back
frame by frame.
CAMERA
VCR
STOP
V
/REW
STILL ADV
VOL
PLAY
PAUSE
FF/
W
STILL ADV
W
STOP
V
/REW
STILL ADV
VOL
PLAY
PAUSE
FF/
W
STILL ADV
W
DVC20_Eng.book 25 ページ 2005年10月31日 月曜日 午前10時36分

Table of Contents

Related product manuals