Panasonic DVD-LS91 - Playing discs; Basic Playback Operations

10
RQT8248
Playing discs
≥ To p l a y [JPEG], [MP3], [MPEG4] or [DivX] on DVD-RAM that contain both [DVD-VR] and another format
(e.g. [JPEG]), select “Play as Data Disc” (➜ page 23, Other Menu).
≥ While stopped, the unit automatically turns off once 15 minutes (after approximately 5 minutes when
using the battery pack) have elapsed.
≥ Discs continue to rotate while menus are displayed. Press [ ∫ , –OFF] when you finish to preserve the unit’s motor.
≥ Total title number may not be displayed properly on iR/iRW.
≥ If you are experiencing problems, refer to troubleshooting guide (➜ page 28).
Operations
Turn unit on/play
When the unit is off:
Press and hold and the power comes on and play
begins.
When the unit is on:
Press and play begins.
Pause Press [
1 , ON] to restart play.
Stop
The position is memorized when “Press PLAY to
resume play” appears on the screen.
≥ Press [1, ON] to resume. (Resume play)
Opening the disc lid or pressing [∫, –OFF] while
“Press PLAY to resume play” appears on the
screen cancels the memorized position.
Turn unit off Press and hold until “OFF” is displayed.
1 Open the lid.
2 Insert a disc and
close the lid
.
Click into
place
Load double-sided discs so
the label for the side you
want to play is facing up.
≥ DVD-RAM: Remove discs from
their cartridges before use.
≥ Some discs start to play
automatically when the unit is on.
Headphone terminals [ Ë ]
‡ 3.5 mm stereo mini jack
3 Press and hold.
The unit turns on and play
begins.
When using headphones,
turn down the volume before
connection.
OPEN
ON
VOL
4 Adjust the volume.
ON
ー
OFF
Playing discs
p2‑31.fmPage10Thursday,February23,200612:20PM