Panasonic DVD-LS91 - Audio and Video

15
RQT8248
Enjoying higher quality audio and video
Reproducing more natural audio (Multi Re-master)
≥ [DVD-VR] [DVD-V] (recorded with 48 kHz only) [VCD] [CD]: This feature gives you a more natural
sound by adding higher frequency signals not recorded on the disc, for example, playing DVD-Video
recorded with 48 kHz at 96 kHz.
≥ [WMA] [MP3] (recorded with other than 8 kHz, 16 kHz or 32 kHz): reproduces the frequencies lost
during recording to give you a sound closer to the original.
≥ This feature does not work when H.Bass (➜ below) or Advanced Surround (➜ page 13) is on.
≥ This feature does not work with [MP3] on DVD-RAM or DVD-R/RW.
≥ When connecting with a digital optical cable (➜ page 26), the actual output sampling frequency
depends on “PCM Digital Output” setting in “Audio” tab (➜ page 25).
Enjoying heavy bass with the speakers (H.Bass) [DVD-V]
Providing the suitable picture quality for enjoying movies (Cinema1/Cinema2)
Cinema1: Mellows images and enhances detail in dark scenes .
Cinema2: Sharpens images and enhances detail in dark scenes.
Reducing noise in pictures (Depth Enhancer/MPEG DNR)
Depth Enhancer: Reduces the rough noise in the background to give a greater feeling of depth.
MPEG DNR : Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture.
1 Press [ 34 ] to select “ Other Settings ” .
2 Press [ 1 ] then [ 34 ] to select “Audio Menu”.
3 Press [
1 ] then [ 34 ] to select “Multi
Re-master”.
4
Press [ENTER] and [ 34 ] to select
“1”, “2” or “3”.
5
Press [ENTER].
≥ To exit the screen : Press [RETURN].
Setting
Type of music [[DVD-V] [CD] (LPCM)]
Effect level (Other discs)
1 High tempo (e.g., pop and rock) Light
2 Various tempos (e.g., jazz) Medium
3 Low tempo (e.g., classical) Strong
Off Off Off
1 Press [ 34 ] to select “ Other Settings ” .
2 Press [ 1 ] then [ 34 ] to select “Audio Menu”.
3
Press [ 1 ] then [ 34 ] to select “H.Bass”.
4 Press [ 1 ] then [ 34 ] to select “On” or “Off”.
5 Press [ENTER].
≥ To exit the screen : Press [RETURN].
≥ If the sound is distorted or there is noise, set to “Off”.
1 Press [ 34 ] to select “ Other Settings ” .
2 Press [ 1 ] then [ 34 ] to select “Picture Menu”.
3 Press [1] to select “Picture Mode”.
4 Press [
1 ] then [ 34 ] to select
“Cinema1” or “Cinema2”.
≥ To exit the screen : Press [RETURN].
1 In the procedure 2s4 (➜ above, Cinema1/Cinema2),
select “User” and press [ENTER].
2 Press [
34 ] to select “Picture
Adjustment”and
press [ENTER] .
3
Press [ 34 ] to select “Depth
Enhancer” or “MPEG DNR”.
4
Press [ 2 1 ] to change the setting. (Depth Enhancer: 0 to
i4,
MPEG DNR: 0 to i3)
≥ To exit the screen : Press [RETURN].
The above indicated features may not work depending on the disc’s recording.
DISPLAY
1
Press once.
ENTER
2
Menu
Multi Re-master 1
1
Press once.
DISPLAY
ENTER
2
Menu
H.Bass
Off
DISPLAY
1
Press once.
ENTER
2
Menu
Picture Mode
Cinema1
DISPLAY
1
Press once.
ENTER
2
Picture Adjustment
Depth Enhancer
Depth Enhancer
0
MPEG DNR
0
Enjoying higher quality audio and video
p2‑31.fmPage15Thursday,February23,200612:20PM