Headphone terminals [
W
]
ø 3.5 mm (1/8") stereo mini jack
SETUP
Insert a disc and close the lid.
● Load double-sided discs so the label for
the side you want to play is facing up.
● Some discs start to play automatically
when the unit is on.
Click into
place
Press.
The unit turns on and play begins.
Adjust the volume.
When using headphones,
turn down the volume before
connection.
Open the lid.
● To change the language on the display → 14, “Language” tab
● While stopped, the unit automatically turns off once about 15 minutes (about 5 minutes when using the battery pack) have
elapsed.
● Total title number may not be displayed properly on +R/+RW.
● If you are experiencing problems, refer to troubleshooting guide (→ 17).
● During playback of DTS source, there will be no sound from the speakers. Select a different audio source (e.g. Dolby Digital).
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [
g
–OFF] when you finish to preserve the unit’s
motor.
Note
To Next Page
Loading...
