EasyManuals Logo

Panasonic DVD-S500 Troubleshooting

Panasonic DVD-S500
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Troubleshooting
No sound
Check the Audio or video connection between the DVD player and the TV. (example; composite
red and white audio cables, HDMI cable)
Turn on your TV and set the TV to the correct input the DVD player is connected to on the TV.
During playback of DTS source, there will be no sound from the speakers. Select a different
audio source (e.g. Dolby Digital). (for DVD-S700 model only) or please connect the unit to an AV
receiver that can decode DTS via an HDMI terminal, and set “Audio Out” to “Bitstream". See
How to set Audio Out to Bitstream or PCM.
Audio Out sets the audio output method when connected to the “HDMI AV OUT” terminal.
1. Press [SETUP].
2. Press []/[] to select "AUDIO, and press [].
3. Press []/[] to select "Audio Out" and press [] to conrm your selection.
4. Press []/[] to select "Bistream" or "PCM"and press [OK].
o To return the previous menu, press w.
o To exit, press [SETUP].
Note:
Select Bitstream when the connected equipment is supporting Dolby Digital.
Select PCM when the connected equipment is not supporting Dolby Digital.
Messages on the screen - "Cannot read. Please check the disc."
An incompatible disc is inserted. (Video CD, etc).
Messages on the screen - "Cannot read. Please check the disc."
An incompatible disc is inserted. (Video CD, etc).
Messages on the screen - "No disc inserted."
The disc may be upside down.
Messages on the unit’s display - "NO READ"
The media is dirty or badly scratched. The unit cannot play.Try another disc and confirm if the disc plays.
If the player is unable to play all the discs, then it will require service. Press and hold [OPEN/CLOSE] to
eject disc.
Forgot the rating levels password. - DVD-S700, DVD-S500

Other manuals for Panasonic DVD-S500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic DVD-S500 and is the answer not in the manual?

Panasonic DVD-S500 Specifications

General IconGeneral
Video upscaling-
Progressive scan outputYes
Analog signal format systemNTSC, PAL
Audio decodersDolby Digital
Audio dynamic range DVD80 dB
Signal-to-Noise Ratio (SNR)90 dB
Audio formats supportedMP3
Image formats supportedJPEG XR
Video formats supportedXVID
HDMI ports quantity0
USB 2.0 ports quantity1
Playback disc typesCD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Playback disc formatsCD audio, CD video
Card reader integratedNo
Number of optical discs1 discs
Device typeDVD player
Product colorBlack
Disc loading typeTray
AC input voltage220-240 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)10 W
LED indicatorsY, Power
Weight and Dimensions IconWeight and Dimensions
Depth204 mm
Width310 mm
Height39 mm
Weight1100 g

Related product manuals