To Next PageTo Next PageWhy Panasonic DVD-S55 has no power?
To address a Panasonic DVD Player that has no power or automatically switches to standby mode, ensure the AC power supply cord is securely inserted into the household AC outlet. Note that the unit automatically enters standby after about 30 minutes in stop mode. Also, check if the SLEEP timer has been activated.
How to fix a Panasonic DVD-S55 with no power?
To fix a Panasonic DVD Player that won't turn on, ensure the AC power supply cord is securely inserted into the household AC outlet. Note that the unit automatically switches to standby after approximately 30 minutes in stop mode. The SLEEP timer may also be activated. In this case, turn the power back to ON.
Why is there no sound from my Panasonic DVD-S55 DVD Player?
If you're experiencing no sound, distorted sound, or piercing noise from your Panasonic DVD Player, start by checking all connections and volume levels on connected equipment. Make sure the input settings are correct. If distortion occurs, try turning Advanced Surround off or activating the Attenuator, especially with analog connections. Note that when Advanced Surround is on, the output will be in stereo. For multi-channel DVD-Audio discs, sound output may be limited to speakers specified by the disc; refer to the disc's instructions. Also, noise may occur when playing WMA files. If connected via the DIGITAL AUDIO OUT terminal, verify the 'Dolby Digital' and 'DTS Digital Surround' settings in the SETUP menu.
How to fix abnormal picture on Panasonic DVD-S55 DVD Player?
If the picture on your television is not normal when using your Panasonic DVD Player, this may be due to the editing method or material used on the DVD-Video. To correct this, go to the Video settings in the SETUP menu and adjust the 'TV Aspect' to match your television. If your television cannot adjust the aspect in progressive mode, try changing the 4:3 Aspect using the On-Screen Menu Icons. Also, turn off any zooming features on your TV and ensure the unit is directly connected to the television, not through a video cassette recorder. You can also change the 'Video output mode' to '480I' and check the settings in the On-Screen Menu Icons' Picture Menu.
Why is the picture distorted on my Panasonic DVD Player?
If the picture is distorted, the menu isn't displayed correctly, or there's no picture on your Panasonic DVD Player, some distortion can be normal during search. Try restoring the zoom ratio to a1.00 and setting the subtitle position to 0. Set '4:3 Aspect' to 'Normal'. Check the connection to ensure it is secure and that your television is turned on. Also, verify that the television’s video input setting (e.g., VIDEO 1) is correctly selected.
How to fix 'Cannot display group' error on Panasonic DVD-S55 DVD Player?
If your Panasonic DVD Player displays 'Cannot display group xx, picture xx,' or indicates that 'The progressive out is set to 'Disable',' it could be due to incompatible pictures. To resolve this, go to the Video settings in the SETUP menus and select 'Enable' for 'Progressive Out (Component)'. If there's no on-screen display or it's only partially displayed, go to the Display settings in the SETUP menus and select 'On' for 'On-Screen Messages'. You can adjust the position by pressing [DISPLAY] and using [2, 1] to highlight the Bar Position icon, then [3, 4] to adjust. If the disc’s menu is in a different language, go to the Disc settings in the SETUP menus and select your preferred language for 'Menus'.
How to fix a distorted or no picture on a Panasonic DVD-S55 DVD Player?
If the picture on your Panasonic DVD Player is distorted, the menu isn't displayed correctly, or there's no picture, try these solutions: * Check the connection. * Make sure the television is on. * Ensure the television’s video input setting is correct. * Restore the zoom ratio to a1.00. * Set the subtitle position to 0. * Set “4:3 Aspect” to “Normal.”
What does 'NoPLAY' mean on a Panasonic DVD Player?
If your Panasonic DVD Player displays 'NoPLAY,' 'CHECK,' 'H??,' or 'NoDISC,' it might be due to several reasons. Ensure that you are using a compatible disc. A blank DVD-RAM will also cause this message. Clean the disc if it is dirty. If trouble has occurred, reset the unit by switching it to standby mode and then back on, or by disconnecting and reconnecting the AC power supply cord. If the issue persists, note the service number and contact a qualified service person. Also, make sure a disc is inserted correctly.
What to do if my Panasonic DVD-S55 says “NoPLAY” “CHECK” “H??” or “NoDISC”?
If your Panasonic DVD Player displays “NoPLAY”, “CHECK”, “H??” (where ?? stands for a number), or “NoDISC”, here are a few things to try: * If you inserted a disc the unit cannot play, insert one it can. * If the disc is dirty, wipe it clean. * If you haven’t inserted a disc, insert one. * If you haven’t inserted the disc correctly, insert it correctly. If trouble may have occurred, reset the unit by pressing [POWER Í/I] to switch the unit to the standby mode and then back to ON. Alternatively, press [POWER Í/I] to switch the unit to the standby mode, disconnect the AC power supply cord, and then reconnect it. If the service numbers fail to clear, note the service number and contact a qualified service person.
How do I fix the picture size on my Panasonic DVD Player?
To resolve issues with the picture not appearing normal on your Panasonic DVD Player, such as cut-off sides, stretching, or black bands, go to Video in the SETUP menus and change “TV Aspect” to suit your television. You can also use the television to change the aspect to the correct one. Turn off the zooming feature of your television if you are using Variable Zoom. Ensure that the unit is connected directly to the television, and is not connected through a video cassette recorder. If there is ghosting when progressive output is on, change “Video output mode” to “480I.” Check the settings in the On-Screen Menu Icons’ Picture Menu. This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output.
General| Type | DVD Player |
|---|---|
| Video D/A converter | 54 MHz/10-bit |
| Audio D/A converter | 192 kHz/24-bit |
| Progressive Scan | Yes |
| HDMI Output | No |
| Component Video Output | Yes |
| Composite Video Output | Yes |
| Digital Audio Output | Coaxial |
| Remote Control | Yes |
| Weight | 2.4 kg |
| Disc formats | DVD, CD, MP3, JPEG |
| Playable Discs | DVD-Video, DVD-R, DVD-RW, CD, CD-R, CD-RW |
| Audio DAC | 24 bit / 192 kHz |
| Output Resolution | 480p |
| Output Video | Component Video, Composite Video |
| Output Audio | Digital Audio, Analog Audio |
| Analog Audio Output | Stereo |
| Dimensions (W x H x D) | 430 x 54 x 253 mm |
| Dimensions | 430 x 54 x 253 mm |
Lists and identifies supplied accessories for replacement.
Provides critical safety warnings for laser radiation and electric shock.
Instructions for cleaning the unit with a soft, dry cloth.
Detailed description of each button on the remote control.
Explains how to connect the unit to a television for audio and video.
Details component and S-video connections for improved picture quality.
Details settings for digital recording from DVDs.
Notes on analog recording limitations.
Lists all disc formats the player can recognize and play.
Lists disc formats that are not compatible with the player.
Guidelines for handling discs to prevent damage and for cleaning.
Instructions for inserting and handling remote control batteries.
How to set the TV aspect ratio for optimal display.
Steps to enable and enjoy progressive video output.
How to start playback from a specific track or item.
How to select groups of tracks or pictures for playback.
How to quickly replay a short segment of the current item.
Setting the player to automatically turn off after a specified time.
Memorizes playback positions on up to five discs.
How to find and play files from discs with mixed content.
How to find tracks using the contents screen.
How to find groups using the tree screen.
How to find and play programs from DVD-RAM discs.
How to play playlists created on other equipment.
Instructions for playing HighMAT discs and navigating their content.
How to change subtitle language and turn subtitles on/off.
How to change camera angles during playback.
How to play audio only by stopping the video signal.
Explains how to achieve surround-like effects with 2 front speakers.
Improves sound quality by reproducing lost high frequencies.
How to change the zoom ratio to fill the screen.
Reduces background noise for a greater sense of depth.
How to select up to 32 items to play in a specific order.
How to play tracks or groups in a random order.
How to play all tracks in all groups on a disc.
General steps for interacting with on-screen menus.
How to view information about the disc being played.
How to select audio and subtitle languages.
Displays information about the unit's status and settings.
Details on A-B repeat and repeat modes.
How to set and recall markers for playback.
How to adjust the display for 4:3 aspect ratio televisions.
Adjusting the brightness of on-screen displays.
Details on Advanced Surround, Double Re-master, and Attenuator.
Settings for Picture Mode, MPEG D.N.R., Picture Control, and Video Output Mode.
Shows the current playback position within an item.
How to slow down or speed up playback.
Settings for audio, subtitle, and menu languages.
TV Aspect, Progressive Out, TV Type, Still Mode, Black Level Control.
Speaker settings, digital output, PCM down conversion, Dolby/DTS.
Menu language, on-screen messages, and FL dimmer.
HighMAT, Mixed Disc, DVD-Video Mode, Demo, Quick Setup.
Steps for accessing and navigating the setup menus.
How to set or enter a password for parental controls.
Configuring digital audio output and PCM down conversion.
Selecting Bitstream or PCM for Dolby Digital and DTS signals.
Adjusting speaker size (large/small) for multi-channel sound.
Adjusting delay time for speakers to match seating position.
Adjusting volume for center and surround speakers.
Solutions for power-related problems.
Troubleshooting common operation problems.
Solutions for distorted or missing picture problems.
Addresses picture anomalies like cutting off, stretching, or ghosting.
Solutions for no sound or distorted sound.
Explains common display messages like "NOPLAY" or "CHECK".
Interprets messages related to TV display compatibility.
