Panasonic DVD-S54

Questions and Answers:

S
sarahandersonJul 31, 2025
What to do if Panasonic DVD-S54 DVD Player not responding to buttons?
- C
  Christopher McdanielAug 1, 2025
  If your Panasonic DVD Player isn't responding, it might be due to a few reasons. Lightning, static electricity, or another external factor could be interfering with the unit. Try turning it off and then back on. If that doesn't work, turn it off, disconnect the AC mains lead, and then reconnect it. Condensation could also be the issue; wait 1 to 2 hours for it to evaporate. If you're using the remote, the batteries might be depleted; replace them with new ones. If you have forgotten your ratings password, while stopped, remove the disc, and then press and hold [q] (PLAY) and [g] on the unit and then also press and hold [8] on the unit until “INITIALIZED” disappears from the television. Turn the unit off and on again. All settings will return to the default values.
B
brittany86Aug 5, 2025
How to fix Panasonic DVD-S54 no power?
- A
  Audrey Rodriguez DDSAug 6, 2025
  If your Panasonic DVD Player has no power, ensure the AC mains lead is securely inserted into the household mains socket. Also, if “AUTO POWER OFF” is set to “ON”, the unit automatically switches to standby after approximately 30 minutes in the stop mode.
P
Peter MezaAug 13, 2025
How to fix Panasonic DVD-S54 DVD Player when it has no power and goes to standby mode?
- M
  Michaela PriceAug 13, 2025
  If your Panasonic DVD Player is not powering on and automatically switches to standby mode, ensure the AC mains lead is securely inserted into the household mains socket. Also, check if the “AUTO POWER OFF” feature is set to “ON”. If it is, the unit will automatically switch to standby after approximately 30 minutes in stop mode.
C
Catherine GrahamAug 18, 2025
Why is my Panasonic DVD-S54 DVD Player showing ghosting?
- C
  Christopher MorrisAug 18, 2025
  If you're seeing ghosting on your Panasonic DVD Player when progressive or HDMI output is on, it's likely due to the editing method or material used on the DVD-Video. To resolve this, change “VIDEO OUT (I/P)” in the “VIDEO” menu to “INTERLACE”.
C
Craig RogersAug 25, 2025
Why is there ghosting when progressive or HDMI output is on Panasonic DVD-S54 DVD Player?
- A
  andrewstevensAug 25, 2025
  If you experience ghosting when progressive or HDMI output is on your Panasonic DVD Player, this could be due to the editing method or material used on the DVD-Video. To resolve this, change the 'VIDEO OUT (I/P)' setting in the 'VIDEO' menu to 'INTERLACE'.