Panasonic E series Operating Instructions

6
How to use
POWERFUL
QUIET
AIR CONDITIONER
MODE
AIR C
O
NDITI
O
NE
R
M
O
DE
Press and hold for
approximately
10 seconds to show
temperature setting in
°F or °C.
Press and hold for
approximately
5 seconds to show
12-hour (am/pm) or
24-hour time indication.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
Remote control display
To select operation mode
AUTO - For your convenience
• During initial operation mode selection, the
Power indicator blinks.
Single
• Unit selects operation mode every
10 minutes according to setting
temperature and room temperature.
Multi
• Unit selects operation mode
every 3 hours according to setting
temperature, outdoor temperature and
room temperature.
HEAT - To enjoy warm air
• Unit may take a while to warm up. The POWER
indicator blinks during the initial warm up
operation.
COOL - To enjoy cool air
• Provides effi cient comfort cooling to suit your
needs.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To circulate air in the room
POWERFUL
To reach temperature quickly
POWERFUL
Single
• This operation stops automatically after
20 minutes.
Multi
• Press the button again or turn OFF the
unit to stop this operation.
OFF/ON button
Use when remote control is misplaced or a malfunction occurs.
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced COOL
mode.
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release to use in
normal COOL mode.
4. Repeat step 3. Press and hold the button until you hear 3 beeps, then release to use in
forced HEAT mode.
• Press the button again to turn off.
Single
Single split system
Multi
Multi split system
Remote control receiver
Indicator
POWER
(Green)
TIMER
(Orange)
POWERFUL
(Orange)
QUIET
(Orange)

Panasonic E series Specifications

General

Brand	Panasonic
Model	E series
Category	Air Conditioner
Language	English