Operation
Model : NR-CY55C (PSAU)
1 Set the LED display to “Min” position by pressing the [Select] button to select [Fridge]
(refrigerator compartment) then press the [Temp. Control] button to select Min.
2 Press and hold the [Temp. Control] button for approximately 10 seconds until the LED
display returns to the “Min” position.
3 The temperature can be adjusted in 9 different levels as specified in the cooling level
table below. By pressing the [Temp. Control] button, the cooling level increases by an
increment of 1 level.
To adjust the temperature for the Freezer Compartment
Follow steps
1
~
3
above respectively while pressing the [Select] button and selecting
[Freezer] (freezer compartment) instead of [Fridge] (refrigerator compartment).
To reset the setting “9 levels” mode
Repeat steps 1 and 2 to return the unit to normal operation mode.
●LED Display table (Model : NR-CY55C (GKAU))
Cooling
Level
Step
Minimum
Maximum
LED Display
123456789
Lighting Blinking
Not lighting
●LED Display table (Model : NR-CY55C (PSAU))
Cooling
Level
Step
Minimum
Maximum
LED Display
123456789
Lighting Blinking
Not lighting
●The temperature control can vary depending on the environment and amount of food
stored in the refrigerator.
To use all features
12
ARAH1E200680_EN.indd 12 8/14/19 10:03 AM
To Next Page
Loading...
